Table of Contents
Advertisement
To install the memory module
1 Shut down your HD6500. Disconnect all cables connected to your HD6500 to prevent any possible damage.
2 Open the rear top cover.
1 Remove the screw on the back of you HD6500.
2 Press the small buttons located on both sides of HD6500.
3 Slide open the rear cover, then lift it up and put it aside.
Note:
When you remove the top cover, sensitive internal components are exposed. Avoid touching anything
other than the memory assembly when removing or adding memory.
3 Remove the screws that secure the ventilation duct cover, pull up the ventilation duct cover, and put it aside.
18 Chapter 2: Hardware Setup
Advertisement
Table of Contents
