Start-Up - VALBERG CF 198 E W625C Instructions For Use Manual

B

Start-up

• Open the cover plate from the side, using the tool provided.
• Open the cover plate, take out the power cord, and then replace the cover plate.
• After transportation, please let the freezer stand for at least 2 hours before turning on
the power supply, otherwise its cooling capacity will be decreased or the freezer may be
damaged.
• The freezer should be run for 2 to 3 hours before loading it with fresh or frozen foods; the
freezer should run for more than 4 hours in summer, as the ambient temperature is higher
in this season.
• Unplug the freezer in the event of a power failure or during cleaning operations. Do not
connect the freezer to the power supply for at least five minutes, in order to prevent
damages to the compressor due to successive starts.
(The picture above is for reference purposes only. The actual configuration will depend on the
physical product, or on the notice provided by the distributor.)
Using the appliance
6 EN