STREET WISE PF9200 Series Instructions

Contact Probes
1.
LED Flashlight
2.
Function Select Switch
3.
Stun Activation Button
4.
Charging Port
5.
On/Off Switch
6.
Charging Indicator Light
7.

RECHARGING

1. The rechargeable batteries are already installed. Please do not attempt to open the unit, as this will
void the warranty.
2. We recommend charging the stun flashlight before it is used. Simply plug the charging cord into the
bottom of the unit and into a standard outlet. The green light on the bottom of the unit will illuminate
while the charging cord is plugged in. Note that the green light does not turn off or change color
when fully charged. Simply charge for 8 hours then unplug it from the charging cord.
IMPORTANT: do not charge for more than 8 hours at a time. Overcharging can damage the unit and
void the warranty. When used infrequently the unit will need to be recharged for 8 hours every 60
days. If the flashlight is not as bright or if the electrical current becomes noticeably weaker, the unit
will need to be recharged.

USING THE FLASHLIGHT

Note: The flashlight will work with the Stun ON/OFF Switch in either the ON or OFF position. If you are in a
situation where you might need to quickly activate the stun gun (like walking at night) we recommend you
use the ON position. If you don't anticipate needing the stun gun (at home during a power outage) we
recommend the OFF position.
1. Slide the Function Select Switch up to the top position.
2. The flashlight will come on either: the Hi, Medium, Low, Strobe Mode, or SOS setting.
3. If you want to change to another light mode move the Switch down to the middle position, then back
up to the top position.

TESTING THE STUN GUN

We recommend test firing the stun gun and becoming familiar with its operation before you need to use it
to defend yourself. (WARNING: Do not test fire the stun gun for more than 1 second as this will damage
the unit and void the warranty.)
1. Slide the ON/OFF switch (located on the bottom of the unit) to the ON position.
2. Slide the Function Select Switch down to the bottom position.
3. Press the Stun Activation Button to test fire the unit. Do not hold down the button for more than 1
second. You will see and hear a charge fire across the top of the unit between the test probes.
PF9200 Series Instructions
PF9200 Series Instructions
1
2
PF9200GM
3
1
PF9200BK
6
4
1
5
7
Rev 4/12/2018