Frigidaire FDPC4314AS Use & Care Manual page 7

High Temp Option
When the High Temp option is
selected, the dishwasher heats water
in the main wash to approximately
155 F (68 C).
o o
This increase in water temperature
helps the dishwasher detergent
remove food grease and soil from
dishes more effectively and aids in
improved drying performance.
When the High Temp option is
selected, the High Temp indicator
illuminates and remains on until the
end of the cycle. To turn off the High
Temp option, press the Temp pad
to select a different temperature
option.
Max Dry
3
When the Max Dry option is
selected, the dishwasher extends
drying time by approximately 20
minutes. The Max Dry option can
be used with all cycles except. For
best drying performance, also apply
an increased wash temperature by
selecting High Temp or even better,
the Sanitize option.
The energy required to use the Max
Dry option costs pennies per cycle.
You may choose not to select the
Max Dry option; however you may
have items in your dish load that will
not be completely dry at the end of
the cycle.
Heat Dry
The Heat Dry option in combination
with rinse aid will enhance drying
performance. The energy required
to use the Heat Dry option costs
pennies per cycle; however you will
have items in your dish load that will
not be completely dry at the end of
the cycle.
Select the Normal Wash and High
Temp Wash Option along with a
Rinse Aid agent for improved drying
performance.
CONTROLS AND SETTINGS
4
5
6
Delay Time
The Delay Start option allows you
to automatically delay starting your
dishwasher for 4 hours.
To activate delay start option for 4
hour delay, press and hold the Dry
pad for 3 seconds. A light will come
on indicating the delay start hours and
will remain on until cycle starts. Press
the START/CANCEL pad to start the
delay option. If the delay option is
interrupted, press the START/CANCEL
pad again to return to the delay
option.
To cancel the Delay Start option and
begin the cycle before the delay
period is over, press and hold the
START/CANCEL pad for 3 seconds.
Start/Cancel Button
When cycle and options are
selected, LEDs of selected cycle and
options are illuminated. The status
window displays the cycle time.
To start the cycle, press START/
CANCEL pad and close the
dishwasher door immediately.
You can cancel a cycle anytime
during the cycle. Press and hold
the START/CANCEL pad for 3
seconds. The light beside the cycle
and option selected will go out, the
START/CANCEL light will remain
illuminated, the dishwasher will start
a 90 second drain. At the end of the
drain, select the next desired cycle.
Status indicator Lights
When the Sanitize option is
selected, the Sanitized light will
glow when the Sanitize cycle is
finished. If the dishwasher did not
properly sanitize the dishes, the
light will not come on. This can
happen if the cycle is interrupted.
The light will remain on until the
door is opened.
The Clean light will come on at the
end of cycle and remain on until the
door is opened.
7