AEG L 87490 FL User Manual page 17

10.5 Setting a programme
1. Turn the programme knob. The
related programme indicator comes
on.
The indicator of button Inicio/Pausa
flashes with red colour.
The display shows the default
temperature, the spin speed and the
empty indicator bars of the available
functions.
2. To change the temperature and/or
the spin speed, press the related
buttons.
3. Set the available functions.
10.6 Starting a programme
without the delay start
Press button Inicio/Pausa to start the
programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the door is
locked. The display show the indicator
.
The drain pump can operate
for a short time when the
appliance fills water.
10.7 Starting a programme
with the delay start
1. Press button Inicio Diferido again
and again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press button Inicio/Pausa.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Inicio/Pausa to start the
appliance, you can cancel or
change the set of the delay
start.
10.8 Cancelling the delay start
To cancel the delay start:
1. Press button Inicio/Pausa to set the
appliance to pause.
The related indicator flashes.
2. Press button Inicio Diferido
repeatedly until the display shows .
3. Press button Inicio/Pausa again to
start the programme immediately.
10.9 Behaviour of the
appliance
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the
new time value.
10.10 Cancelling a programme
1. Press button Auto Off to cancel the
programme and to deactivate the
appliance.
2. Press button Auto Off again to
activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
drains the water. Make sure
that the detergent is still in
the detergent compartment,
if not fill the detergent
again.
10.11 Interrupting a
programme and changing a
function
You can change only some options
before they operate.
1. Press button Inicio/Pausa.
The related indicator flashes.
2. Change the function set.
3. Press the button Inicio/Pausa again.
The programme continues.
ENGLISH 17