Genie 240 S Manual page 13

We declare that this device, regarding its task of the destruction of documents, fulfils the
conditions defined for Security Level P-2 in accordance with DIN 66399.
P-2: Recommended for data media containing in-house data which should be rendered
illegible. Material particle area ≤ 800 mm² or strip width ≤ 6 mm, strip length unlimited.
Cleaning
Warning! The blades of the device are very sharp! Danger of injury!
1. Switch off the unit.
2. Disconnect the power plug from the power socket.
3. Empty the drip trays regularly.
4. Clean the surface of the housing with a soft, dry, lint-free cloth. Do not use any solvents or
cleaning agents.
5. Remove any residue in the cutting holes with a suitable object.
Declaration of Conformity
GS tested safety mark
The CE Mark on the device confirms conformity. The Declaration of
Conformity can be read online at www.go-europe.com.
The «Geprüfte Sicherheit» mark (GS tested safety mark) certifies that
the product satisfies the requirements defined by the German Product
Safety Act (ProdSG).
The GS tested safety mark indicates that when implemented for its
intended use and in the event of foreseeable misuse the identified
product will not endanger the safety and health of the user. It concerns
a voluntary safety mark which was issued by an authorized testing
institute.
13