Grill & Fan Blade Assembly - Beko EFS8000W User Manual

4 Grill & Fan blade assembly
1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the plastic nut
counterclockwise to remove both of them. Fix the rear grill to the motor then tighten the plastic nut
again. (Fig. 5)
2. Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove of the blade. Turn
the spinner counterclockwise to tighten the blade. (Fig. 6)
3. Fix the front grill and the rear grill with circlip clip and then use the fasten clip to tighten the fan grill.
(Fig. 7)
Fig. 5
1. Plastic nut
2. Spinner
3. Spinner
8 / 16 EN
3
1
Tighten
Loosen
2
Fig. 6
Tighten
4 5
6
4. Retaining pin
5. Slot
6. Blade set
Fig. 7
Stand Fan / User Manual