Installation Instructions - La Sommeliere LS38BLACK Instructions Manual

19
To find out more about your product, consult the online EPREL database. As defined in
Commission Delegated Regulation (EU) 2019/2016, all information relating to this refrigeration
appliance is available on the EPREL Base (European Product Database for energy labeling). This
database enables you to consult the information and technical documentation of your refrigeration
appliance. You can access the EPREL Database by scanning the QR code on the energy label of
your appliance or by going directly to: www.ec.europa.eu and searching the reference of your
refrigeration appliance.
Announced capacity
The advertised capacity is measured according to the EN62552 standard. This standard is
calculated with 75cl traditional Bordeaux type bottles. Any other type of bottle format as well as
the addition of shelves will considerably reduce the storage capacity. The maximum capacity is
calculated with a defined number of shelves which vary according to the models.

4. INSTALLATION INSTRUCTIONS

Before using this appliance
• Remove the exterior and interior packing.
• Before connecting the appliance to the power source, let it stand upright for approximately 24
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• When disposing your appliance, please choose an authorized disposal site.
• Place your wine cooler on a floor that is strong enough to support it when it is fully loaded. To
level your Wine cooler, adjust the front leveling leg at the bottom of the wine cooler.
• Adequate ventilation is required, do not block the front air outlet.
• This wine cellar is designed for free-standing
• Connect the cellar to a single socket, leaving a 30-mm gap between the back of the cellar and
the wall. Be careful to support it, so that your wine cellar is perfectly level (use of a spirit level
is recommended). This will prevent any movement due to instability, causing noise and
vibration, and will ensure that the door seals perfectly.
• This appliance is intended to be used exclusively for the storage of wine.
• This appliance is using flammability refrigerant. So never damage the cooling pipe work during
the transportation.
Caution
• This device is only intended to be installed in free standing, in no case it must be installed
in a built-in or embeddable way.
• Store wine in sealed bottles.
• Do not overload the cabinet.
• Do not open the door unless necessary.
• Do not cover shelves with aluminum foil or any other shelf material which may prevent air
circulation.
• Should the wine cooler be left empty for long periods it is suggested that the appliance is
unplugged, and after careful cleaning, leave the door ajar to allow air to circulate inside the
cabinet in order to avoid possible condensation, mold or odors forming.
CAUTION: please keep the appliance away from substance, which can cause ignition.
Ambient temperature ranges and climate class of the device:
This appliance is indicated for operation in rooms with a very specific ambient temperature, this
climatic class is indicated on the rating plate. The ambient temperature affects the interior
temperature, the humidity of your cellar, and the operation of the compressor. Your device can
operate in an ambient temperature between 5°C and 20°C. Outside of these limits, your device
cannot guarantee normal operation and may cause breakdowns. For optimal operation and to
achieve the desired performance, the device has been designed to operate at an ambient