Table of Contents
Advertisement
, Call channel programming
q While
pushing
[H/L],
[CH/WX•DW
] several times
U/I/C
to select the desired channel
group (USA, INT, CAN) to be pro-
grammed.
w Push [16•9] for 1 sec. to select call
channel of the selected channel
group.
• "C C A A L L L L " and call channel number
appear.
e Push [16•9] again for 3 sec. (until
a long beep changes to 2 short
beeps) to enter the call channel
programming condition.
• The channel number to be pro-
grammed blinks.
r Rotate [SELECTOR
CH
the desired channel.
t Push [16•9] to program the dis-
played channel as the call channel.
• The channel number stops blinking.
• Push [CH/WX] to cancel.
. Lock functions
The Lock function electronically locks keys and switches to
prevent accidental changes and function access from the mi-
crophone.
All keys, switches and controllers on the transceiver are
functional.
D D Activating the Lock function
➥ While
pushing
[H/L],
[VOL/SQL•MONI ] to turn the
L
Lock function ON or OFF.
• "
" appears.
• Only [PWR] ([CLR]/[MENU]),
[DISTRESS],
[PTT],
[VOL/SQL•MONI
] and [SE-
L
LECTOR] are functional.
D D Activating the All Key Lock function
➥ While pushing [H/L], turn the
power ON by pushing [PWR] to
turn the All Key Lock function ON
or OFF.
• "
" blinks.
• Only [PWR] ([CLR]/[MENU]),
[DISTRESS] and [PTT] are func-
tional.
push
BUSY-25W---INT---CALL
LOCAL--DUP
SCRAM--TAG
NORMAL-SCAN
[VOL]
-34"34.206N
123"23.236W
--UTC-10:10-
VTS
BUSY-25W---INT---CALL
LOCAL--DUP
SCRAM--TAG
NORMAL-SCAN
[CH-]
-34"34.206N
123"23.236W
--UTC-10:10-CALLING
BUSY-25W---INT---CALL
LOCAL--DUP
SCRAM--TAG
NORMAL-SCAN
[CH-]
-34"34.206N
123"23.236W
--UTC-10:10-CALLING
BUSY-25W---INT---CALL
] to select
LOCAL--DUP
SCRAM--TAG
NORMAL-SCAN
[CH-]
-34"34.206N
123"23.236W
--UTC-10:10-
INTL
BUSY-25W---INT---CALL
LOCAL--DUP
SCRAM--TAG
NORMAL-SCAN
[CH-]
-34"34.206N
123"23.236W
--UTC-10:10-
INTL
push
BUSY-25W
25W---
---INT
INT---CALL
---CALL
LOCAL--
LOCAL--DUP
DUP
SCRAM
SCRAM--TAG
--TAG
NORMAL-SCAN
NORMAL-SCAN
[CH-]
[CH-]
-34"34.206N
34"34.206N
123"23.236W
123"23.236W
--UTC
--
UTC-10:10
10:10- -
INTL
INTL
[H/L],
Appears
BUSY-25W
25W---
---INT
INT---
---CALL
LOCAL--
LOCAL--DUP
DUP
SCRAM
SCRAM--TAG
--TAG
NORMAL-SCAN
NORMAL-SCAN
[CH-]
[CH-]
-34"34.206N
34"34.206N
123"23.236W
123"23.236W
--UTC
--
UTC-10:10
10:10- -
INTL
INTL
⁄0 Dualwatch/Tri-watch operation
q Select Dualwatch or Tri-watch in
Set mode.
w Rotate [SELECTOR
pushing [CH/WX•DW
select the desired channel.
• While pushing [H/L], push
[CH/WX•DW
to select the channel group
(USA, INT, CAN), if desired.
e Push [CH/WX•DW
watch.
• "D D U U A A L L 1 1 6 6 " appears during Dualwatch; "T T R R I I 1 1 6 6 " appears
during Tri-watch.
• A beep tone sounds when a signal is received on Channel 16.
• Tri-watch becomes Dualwatch when receiving a signal on the
call channel.
r To cancel Dualwatch or Tri-watch, push [CH/WX•DW
again.
⁄1 Setting TAG channels
q While pushing [H/L], push [CH/WX•DW
to select the desired channel group (USA, INT or CAN).
w Push [CH/WX•DW
lect the desired channel to be set as a TAG channel.
e Push [SCAN•TAG] for 1 sec. to set the displayed channel
as a TAG channel.
• "T T A A G G " appears in the display.
r To cancel the TAG channel setting, repeat step e.
• "T T A A G G " disappears.
✔ Clearing (or setting) all tagged channels
While pushing [H/L], push [SCAN•TAG] for 3 sec. (until a long
beep changes to 2 short beeps) to clear all TAG channels in
the channel group.
• Repeat above procedure to set all TAG channels.
⁄2 Starting a scan
Set scan type (Priority or Normal scan) and scan resume timer
in advance, using Set mode.
q While pushing [H/L], push [CH/WX•DW
to select the desired channel group (USA, INT or CAN).
w Set TAG channels as described at previous item.
e Make sure the squelch is closed to start a scan.
r Push [SCAN•TAG] to start Pri-
ority or Normal scan.
• "P P R R I I - - S S C C A A N N 1 1 6 6 "or "N N O O R R M M A A L L
S S C C A A N N " appears during Priority
CALL
or Normal scan, respectively.
• When a signal is detected, scan
pauses until the signal disap-
pears or resumes after pausing
5 sec. according to the Set mode
setting (Channel 16 is still moni-
Blinks
tored during Priority scan).
• Rotate [SELECTOR
to change the scanning direction or resume the scan manu-
ally.
• "1 1 6 6 " blinks at the channel comment indicator and a beep tone
sounds when a signal is received on Channel 16 during Prior-
ity scan.
t To stop the scan, repeat step r.
4
Appears
BUSY
BUSY-25W
25W---
] after
LOCAL--DUP
LOCAL--DUP
CH
SCRAM
SCRAM--TAG
--TAG
] to
U/I/C
----DUAL
----
DUAL-16
[VOL]
[VOL]
-34"34.206N
34"34.206N
123"23.236W
123"23.236W
--UTC
--
UTC-10:10COMMERCIAL
10:10COMMERCIAL
] several times
U/I/C
] for 1 sec. to start Dualwatch or Tri-
U/I/C
U/I/C
] then rotate [SELECTOR
U/I/C
U/I/C
Appears
BUSY-25W
BUSY
25W---
LOCAL--DUP
LOCAL--DUP
SCRAM--
SCRAM
--TAG
NORMAL
NORMAL-SCAN
-34"34.206N
34"34.206N
123"23.236W
123"23.236W
--
--UTC
UTC-10:10COMMERCIAL
10:10COMMERCIAL
During normal scan
] to check the scanning TAG channels,
CH
---INT
INT---CALL
---CALL
16
]
U/I/C
] several times
] to se-
CH
] several times
---INT
INT---CALL
---CALL
TAG
SCAN
[CH
[CH-]
Advertisement
Table of Contents
