Icom HM-133S User Manual

ABOUT HM-133S (for IC-2100 series)
The supplied microphone HM-133S is redesigned from the HM-98S. The functions
of HM-133S are instructed in this sheet.
Please refer to following information.
Second Function
First Function
Push the key to accessible the first function of keys.
Push the key fter FUNCTION SWITCH (
a
the second function of keys.
the key fter DTMF-S (o
Push a
function of keys.
* The number in ( ) indicates the instruction's page number.
q KEYPAD
Push to accessible the first function of keys.
Used for controlling the transceiver, transmitting a DTMF
signals, etc. See back page for function details.
w ACTIVITY INDICATOR
Lights red while any key is pushed (except [FUNC] or
[DTMF-S].
Lights red while transmitting.
Lights green while the one-touch PTT function is in use.
e UP/DOWN SWITCHES
➥ Push either switch to change the operating frequency,
memory channel, set mode contents, etc. (pgs. 15, 26)
➥ Push either switch for 1 sec. to start scanning. (p. 37)
r PTT SWITCH
➥ Push for 1 sec. to transmit; release to receive.
➥ Toggles between transmitting and receiving while the
one-touch PTT function is in use. (p. 20)
t VFO/LOCK SWITCH
➥ Push to select VFO mode.
➥ Push for 1 sec. to toggle the lock function ON and OFF.
(p. 14)
y MEMORY/CALL SWITCH
➥ Push to select memory mode. (p. 26)
➥ Push for 1 sec. to select call channel. (p. 32)
Third Function
!0 )
to accessible
to accessible the third
)
y
t
r
e
w
q
u NULL SWITCH [B]
No function.
i FUNCTION SWITCHES (p. 57)
Assign your desired key function from the front panel
switches.
• Default settings are [LOW] for [F-1] ([DUP] when pushed and
held) and [TONE] for [F-2] ([T-SCAN] when pushed and held).
o DTMF MEMORY SELECT SWITCH [DTMF-S]
(pgs. 22, 44, 45)
Push to accessible the third function of keys.
Turns the DTMF encoder ON and OFF.
• When DTMF encoder is activated, function indicator lights green.
• See back page for function details.
!0 FUNCTION SWITCH [FUNC]
Push to accessible the second function of keys.
• Push again to cancel it.
• When accessible the secondary function, function indicator lights
orange.
• See back page for function details.
!1 FUNCTION INDICATOR
➥ Lights orange while [FUNC] is activated—indicates the
second function of switches can be accessed.
➥ Lights green when [DTMF-S] is activated—DTMF sig-
nals can be transmitted with the keypad.
u
i
o
!0
!1
Mic element