Table of Contents
Advertisement
REAR BRAKE PAD INSPECTION AND REPLACEMENT
• Install the pad pin plug B.
3. Inspect:
• Brake fluid level
4. Check:
• Brake lever operation
REAR BRAKE PAD INSPECTION AND
REPLACEMENT
1. Inspect:
• Brake pad thickness a
2. Replace:
• Brake pad
Brake pad replacement steps:
• Remove the protector 1 and pad pin plug
2.
• Loosen the pad pin 3.
• Remove the rear wheel 4 and brake cali-
per 5.
Refer to "FRONT WHEEL AND REAR
WHEEL" section in the CHAPTER 5.
3 - 29
Get other manuals https://www.bkmanuals.com
INSP
ADJ
Pad pin plug:
3 Nm (0.3 m • kg, 2.2 ft • lb)
Refer to "BRAKE FLUID LEVEL INSPEC-
TION" section.
A softy or spongy feeling → Bleed brake
system.
Refer to "BRAKE SYSTEM AIR BLEED-
ING" section.
Out of specification → Replace as a set.
Brake pad thickness:
6.4 mm (0.25 in)
<Limit>: 1.0 mm (0.04 in)
Advertisement
Table of Contents
