Yamaha WR250FR Owner's Service Manual page 253

È
É
FRONT BRAKE AND REAR BRAKE
2. Air bleed:
3. Inspect:
4. Install:
After installation, while pulling the brake
lever in or pushing down on the brake
pedal, check whether there is any brake
fluid leaking where the union bolts are
installed respectively at the brake master
cylinder and brake caliper.
È Front
É Rear
5. Install: (rear brake only)
5 - 26
Get other manuals https://www.bkmanuals.com
• Brake system
Refer to "BRAKE SYSTEM AIR BLEED-
ING" section in the CHAPTER 3.
• Brake fluid level
Fluid at lower level → Fill up.
Refer to "BRAKE FLUID LEVEL INSPEC-
TION" section in the CHAPTER 3.
[Front]
• Diaphragm
• Brake master cylinder cap 1
• Screw (brake master cylinder cap) 2
2 Nm (0.2 m · kg, 1.4 ft · lb)
[Rear]
• Diaphragm
• Brake master cylinder cap 1
• Bolt (brake master cylinder cap) 2
2 Nm (0.2 m · kg, 1.4 ft · lb)
CAUTION:
• Protector 1
• Bolt (protector) 2
7 Nm (0.7 m · kg, 5.1 ft · lb)
CHAS