Honda Accord Sedan 2022 Owner's Manual page 467

uuHonda Sensing®uLow Speed Braking Control
■
How the System Works
The Low Speed Braking Control provides a visual and audible alert when the vehicle
is moving between approximately 1 and 6 mph (2 and 10 km/h) and there is the
possibility of a collision with a detected wall or other obstacle, as well as providing
assistance with braking.
If the only rear sensors are turned off using the parking sensor system, the assistive
braking is not working when reversing.
2 Turning off All Rear Sensors P. 524
* Not available on all models
466
*
Audible Alert
Beep
The vehicle Driver
applies brake depresses
brake pedal
1Low Speed Braking Control
For directions on the proper handling of the sonar
sensors, please refer to the following page.
2 Sonar Sensors
The vehicle will release the brake and start moving a
few seconds after the system is activated. To keep the
vehicle stopped, keep the brake pedal depressed or
put the transmission into
Beep
In order to prevent the system from activating when
not needed, always turn it off during vehicle
maintenance, when loading on ships, trucks, and so
on, when using a chassis dynamometer or free rollers
for inspection or when putting your vehicle through a
conveyor type car wash.
Do not make any modifications to the suspension or
the system may not operate correctly.
Always use the size and type of tires recommended,
make, and amount of wear. If these differ, the system
Stop Remove
brake after
may not operate correctly.
maintaining
stationary
position
*
*
P. 507
( P .