Honda Accord Sedan 2022 Owner's Manual page 460

■
CMBS TM On and Off
Left Selector Wheel
Safety Support Switch
When you turn the CMBS on and off, do the
TM
following.
1. Press the safety support switch.
2. Roll the left selector wheel to the
symbol and push it.
u A message appears on the driver
information interface when the system
turns on or off.
The CMBS TM is turned on every time you start
the engine, even if you turned it off the last
time you drove the vehicle.
uuHonda Sensing®uCollision Mitigation Braking System
1CMBS TM On and Off
The CMBS TM may automatically shut off, and the
safety support indicator (amber) will come and stay
on under certain conditions:
2 CMBS TM Conditions and Limitations P. 460
When the CMBS
operate even if the accelerator pedal is partially
depressed. However, it will be canceled if the
accelerator pedal is fully depressed.
The Vehicle Stability Assist
Stability Assist TM
(ACC) with Low Speed Follow, safety support and
low tire pressure/TPMS indicators may come on in
amber along with a message in the driver information
interface when you set the power mode to ON after
reconnecting the battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
Continued
TM (CMBS
TM is activated, it will continue to
TM (VSA®) system, Vehicle
(VSA®) OFF, adaptive cruise control
TM )
459