uuIndicatorsuDriver Information Interface Warning and Information Messages
Continuously variable transmission models
Message
• Appears if you press the ENGINE START/STOP
●
●
●
●
122
Condition
button to turn the engine off without the shift lever
in
(
P .
Appears when the engine stops without the
transmission in
(
P , and does not restart
automatically.
Appears if you open the hood while Auto Idle Stop
activated.
Appears when the engine does not restart
automatically due to the following reasons:
- The hood is open.
- There is a problem in the system that disables Auto
Idle Stop.
Appears when you turn the Auto Idle Stop system
on.
Explanation
U.S. models
Move the shift lever to
P . The power mode changes to
●
(
VEHICLE OFF.
Canadian models
Move the shift lever to
P , then press the ENGINE
(
●
START/STOP button twice.
If you want to set the power mode to ON, put the
●
transmission into
P .
(
If you want to start the engine, follow the normal
●
procedure.
2 Starting the Engine P. 412
Follow the normal procedure to start the engine.
●
2 Starting the Engine P. 412
2 Auto Idle Stop System ON/OFF P. 436