Switch On The Keep Warm Function; Connecting The Bridge Induction Cooking Zones - Pelgrim IKA6072 Instructions For Use Manual

OPERATION
Switching on the keep warm function
1. Switch on the hob and place a suitable pan on one of the cooking zones.
2. Touch the cooking zone key of the desired cooking zone.
▷ The '0' of the selected cooking zone will light up clearly and a single beep sounds.
3. Touch the keep warm key.
The keep warm symbol 'u' appears in the display. The keep warm function is selected.
▷
4. Set the power level to '0' or touch the keep warm key to switch off the keep warm function.

Connecting the bridge induction cooking zones

Two bridge induction zones can be connected. This creates one large zone that can be used, for
example, with a grill plate or a large fish pan on the same power. The pan must be large enough
to cover the centres of the front and rear cooking zones (min. 220 mm).
Connecting bridge induction cooking zones (depending on the model)
1. Switch on the hob and put a large pan on two bridge induction cooking zones.
2. Simultaneously touch the left-hand side or right-hand side cooking zone keys.
▷ The rear cooking zone display shows a connection symbol to indicate that the two
cooking zones are connected.
3. Set the power level by touching the slide control.
The front cooking zone display shows the power level.
▷
EN 16