Maintenance - Technics SL-1200G-S Owner's Manual

Maintenance

 
Care of the parts
Thoroughly clean dust off the stylus and
record.
 Take off the head shell with the cartridge
and clean the stylus using a soft brush. Brush
from the base to the tip.
 Use a record cleaner to keep your records
clean.
Wipe the head shell terminals occasionally.
Wipe the head shell terminals with a soft cloth
and fit the head shell to the tone arm.
Turn the volume down or turn the amplifier
off before fitting or removing the head shell.
Damage to your speakers can occur if the head
shell is moved while the volume is turned up.
 
Wipe the dust cover and cabinet with a soft
cloth.
When dirt is heavy, wring a wet cloth tightly to
wipe the dirt, and then wipe it with a soft cloth.
 Do not use solvents including benzine,
thinner, alcohol, kitchen detergent, a
chemical wiper, etc. This might cause the
exterior case to be deformed or the coating
to come off.
 Do not wipe the dust cover while playing a
record.
Head shell
This can cause static electricity. This static can
terminals
cause the tone arm to be attracted towards
the dust cover.


Repackage the unit in the packaging it came
in.
If you no longer have the packaging, do the
following:
 Take off the turntable and turntable mat and
carefully wrap them.
 Remove the head shell and balance weight
from the tone arm and carefully wrap them.
 Clamp the tone arm with the arm clamp and
tape it in place.
 Carefully wrap the main unit in a blanket or
paper.
 
Disposal of the product outside the EU
countries
Cleaning the dust cover
Moving the unit
WEEE symbol
This symbol is valid within the EU
only.
Contact a local governmental office
or your dealer to confirm a right
manner of disposal.
23
(23)
English