Table of Contents
Advertisement
7. Maintenance/Parts Replacement
7.1
Replacement
The glass used is a ceramic glass, 5/32" (4 mm) thick, tested to reach temperatures up to 1400º
F. If the glass breaks, it must be replaced with one having the same specification.
To remove or replace the glass (D):
THE IMAGES SHOWN ARE INDICATIVE ONLY AND MAY DIFFER OF YOUR PRODUCT, BUT THE
1.
Remove the door (E) from its hinges and lay it on a soft, flat surface.
2.
Remove the eight screws (A), the eight glass retainers (B), and the metal frames (C).
3.
Remove the glass (D). If it is damaged install a new one in place. The replacement glass must
have a gasket all around (see procedure below).
4.
Reinstall the glass, being careful to centre the glass in the door and not to over-tightening the
retaining screw.
The two main causes of broken door glass are uneven placement in the door and over-tightening
the retaining screws.
Page 32
Do not clean the glass when the stove is hot.
Do not abuse the glass door by striking or slamming shut.
Do not use the stove if the glass is broken.
ASSEMBLY REMAINS THE SAME.
D
E
A
C
Installation and Operation Manual - Fox et Spark II
B
Advertisement
Table of Contents
