Advertisement
Table of Contents
ZEPHYRONLINE.COM
WARNING:
When building a custom hood for a power pack, always follow all applicable construction codes and standards.
See the illustrations and table below to locate your liner choice and use corresponding custom hood
base dimensions. For the liner installation, only the bottom of the custom hood is needed. Do not
finalize the entire custom hood yet, because an opening is needed for the power pack.
FIG 1
Recommended
thickness:
3/4''
Power Pack
Liner
Model
Model
AK8000AS
AK0800AS
AK0836AS
AK8100AS
AK0806BS
AK0806AS
AK8200AS
AK0842AS
AK0848BS
AK0848AS
AK8300ASX
AK0854AS
AK0860AS
AK0840AS
AK8400AS
AK0846AS
AK0886AS
AK0882AS
AK0888AS
AK0884AS
AK8800AG
AK0880AS
AK0886BS
AK8800AS
AK0882BS
AK0888BS
AK0884BS
AK0880BS
*Dimension does not include 3/8" wide flange around liner.
**The inside depth shown in the table above assumes a minimum cabinet backboard thickness of 3/8".
FIG 1:
Zephyr recommends the base of the custom hood to be 3/4" thick plywood. The sides,
front and backboard (if included) of the custom hood to be 3/4" thick, assuming standard
cabinet widths.
Consider the shape and size of the power pack to determine the configuration of the custom hood.
For more details, refer to the installation manual of the power pack.
Zephyr Ventilation
Tel: 1.888.880.8368
OCT18.001
2
'
1/16'
A
Plywood base thickness: 3/4"
Custom Hood
Exterior Width
30 inches
and
36 inches
36 inches
42 inches
48 inches
54 inches
60 inches
30 inches
36 inches
36 inches
42 inches
48 inches
54 inches
60 inches
and
36 inches
42 inches
48 inches
54 inches
60 inches
2277 Harbor Bay Pkwy, Alameda, CA 94502
Fax: 1.888.990.8368
AK08xxxS Adjustable Depth Liners
B
*Inside
Width (A)
Without Backboard
28
"
1/2
17
" - 20
1/2
34
"
1/2
17
" - 20
5/8
34
"
1/2
20
" - 23
1/2
40
"
1/2
17
" - 20
5/8
46
"
1/2
52
"
20
" - 23
1/2
1/2
58
"
1/2
28
"
1/2
17
" - 20
1/2
34
"
1/2
34
"
1/2
40
"
1/2
20
" - 23
46
"
1/2
1/2
52
"
1/2
58
"
1/2
34
"
1/2
40
"
1/2
26
" - 29
46
"
1/2
1/2
52
"
1/2
58
"
1/2
e-mail: productsupport@zephyronline.com
1
*Inside Depth (B)
**With Backboard
"
17
" - 20
1/2
1/8
17
" - 19
1/8"
1/4
"
20
" - 23
1/2
1/8
17
" - 19
1/8"
1/4
"
20
" - 23
1/2
1/8
"
17
" - 20
1/2
1/8
"
20
" - 23
1/2
1/8
"
26
" - 29
1/2
1/8
"
1/8
"
3/4
"
1/8
"
3/4
"
1/8
"
1/8
"
1/8
"
1/8
Advertisement
Table of Contents
Related Manuals for Zephyr AK08 S Series
Summary of Contents for Zephyr AK08 S Series
- Page 1 **The inside depth shown in the table above assumes a minimum cabinet backboard thickness of 3/8”. FIG 1: Zephyr recommends the base of the custom hood to be 3/4” thick plywood. The sides, front and backboard (if included) of the custom hood to be 3/4” thick, assuming standard cabinet widths.
- Page 2 AK08xxxS Adjustable Depth Liners ZEPHYRONLINE.COM CAUTION: Before installing, remove any protective film from all parts. The custom hood liner must be installed before the power pack unit. For installation into shallow “ inside depth) the power pack must be installed before the liner front cabinets (17- ”...
Need help?
Do you have a question about the AK08 S Series and is the answer not in the manual?
Questions and answers