Advertisement
Quick Links
USER MANUAL
ORIGINAL USER MANUAL.
SKU: 0458-395-0871
REV: 1
12 KW ELECTRIC MOTOR
information on assembly, settings and safety instructions.
Read through the user manual carefully and make sure
you understand its contents before using the saw.
This manual describes installation of the electric motor
for the Logosol band sawmill.
Please see the user manual for your band sawmill for
EN
EN
Advertisement
Related Manuals for Logosol 0458-395-0871
Summary of Contents for Logosol 0458-395-0871
- Page 1 REV: 1 12 KW ELECTRIC MOTOR This manual describes installation of the electric motor for the Logosol band sawmill. Please see the user manual for your band sawmill for information on assembly, settings and safety instructions. Read through the user manual carefully and make sure...
- Page 2 PACK SUPPLIED 8400-000-0080 12 kW electric motor, 400V 8400-000-0082 12 kW electric motor, 230V FINAL SAW HEAD ASSEMBLY, 12 KW ELECTRIC MOTOR Read through all the set-up instructions before starting to set up, then follow the instructions step by step as you work. Numbering for installation sequence After assembly, follow the instructions in the sawmill manual under the heading Setup sequence to complete the setting before starting up the machine.
- Page 3 12 KW ELECTRIC MOTOR INSTALLATION: ELECTRIC MOTOR The electric motor comes with the hinge switch connected. Assembly consists of installing the motor on the motor shelf, as well as mounting the pulley and drive belt. The illustration shows the hole pattern for mounting the 12 kW electric motor.
- Page 4 1 x – 03-01988 1 x – M5x50 2 x – M5x16 6 x – 6x16x1 3 x – M5 1 x – 9038-013-0003 1 x – 9038-013-0004 – M5x16 Possibility of phase change to change the direction of rotation of the motor. Fit the drive belt over the wheel and pulley.
- Page 5 12 KW ELECTRIC MOTOR TURN ON/OFF THE SWITCH BOX Turn the dead man’s switch to (1) to turn on the power supply to the machine. START THE MOTOR Hold down the dead man’s switch (button on the right) to start the motor.
-
Page 6: Setup Sequence
Well done! Now you have finished installing the motor, go back to the manual for your band sawmill and carry on with the setup sequence, starting at the point as indicated in the instructions below. SETUP SEQUENCE Read through all the set-up instructions before starting to set up, then follow the instructions step by step as you work. - Page 8 Fiskaregatan 2, SE-871 33 Härnösand, Sweden 0611-182 85 | info@logosol.se | www.logosol.se...