Advertisement
Quick Links
USER MANUAL
ORIGINAL USER MANUAL.
SKU: 0458-395-0861
REV: 1
4.6 / 8 KW ELECTRIC MOTOR
This manual describes installation of the electric motor
for the Logosol band sawmill.
Please see the user manual for your band sawmill
for information on assembly, settings and safety instructions.
Read through the user manual carefully and make sure
EN
EN
you understand its contents before using the saw.
Advertisement
Related Manuals for Logosol 0458-395-0861
Summary of Contents for Logosol 0458-395-0861
- Page 1 REV: 1 4.6 / 8 KW ELECTRIC MOTOR This manual describes installation of the electric motor for the Logosol band sawmill. Please see the user manual for your band sawmill for information on assembly, settings and safety instructions. Read through the user manual carefully and make sure...
- Page 2 PACK SUPPLIED 8400-000-0070 4.6 kW electric motor, 400V 8400-000-0074 4.6 kW electric motor, 230V 8400-000-0072 8 kW electric motor, 400V 8400-000-0076 8 kW electric motor, 230V FINAL SAW HEAD ASSEMBLY, 4.6 / 8 KW ELECTRIC MOTOR Read through all the set-up instructions before starting to set up, then follow the instructions step by step as you work.
- Page 3 4.6 / 8 KW ELECTRIC MOTOR ELECTRIC MOTOR 4.6 / 8 KW The electric motor comes with the hinge switch connected. Assembly consists of installing the motor on the motor shelf, as well as mounting the pulley and drive belt. The illustration shows the hole pattern for installing the 4.6 / 8 kW electric motor.
- Page 4 ELECTRIC MOTOR 4.6 / 8 KW M6x30 M6x25 Now install the safety hinge in the existing holes. 2 x – M6x25 10mm 2 x – M6x30 12mm 1 x – 03-01997 10mm 1 x – 03-02080 12mm 2 x – 03-02182 Install the pulley on the shaft so that it fits on the key.
- Page 5 4.6 / 8 KW ELECTRIC MOTOR ELECTRIC MOTOR 4.6 / 8 KW Fit the switch box on the handle tube. 1 x – M5x50 2 x – M5x16 6 x – 6x16x1 3 x – M5 4.6 kW 1 x – 9038-013-0003 1 x –...
- Page 6 TURN ON/OFF THE SWITCH BOX Turn the dead man’s switch to (1) to turn on the power supply to the machine. START THE MOTOR Hold down the dead man’s switch (button on the right) to start the motor. Then press the start button (on the left). You can release the left button when the motor has started.
-
Page 7: Setup Sequence
4.6 / 8 KW ELECTRIC MOTOR Well done! Now you have finished installing the motor, go back to the manual for your band sawmill and carry on with the setup sequence, starting at the point as indicated in the instructions below. SETUP SEQUENCE Read through all the set-up instructions before starting to set up, then follow the instructions step by step as you work. - Page 8 Fiskaregatan 2, SE-871 33 Härnösand, Sweden 0611-182 85 | info@logosol.se | www.logosol.se...