Table of Contents
Advertisement
1
To host
2
Master to cartridge elevator
3
Cartridge elevator to secondary master
Figure 85. Four module library cabling
2. Install a terminator on the master library controller adapter connection.
3. Optional: Connect the WAN point to the host with a 10BaseT cable as shown in
4. Using 10BaseT cable, connect a cable from router port 1 to the primary master
5. Connect a cable from router port 2 to the secondary master.
6. Continue connecting cables, router port 3 to the third module, port 4 to the
86
4560SLX Tape Library: User's Guide
Figure 64 on page 71 and Figure 85. This step is applicable to systems that
utilize a host. (For WEB TLC operations.)
SDLT module. See Figure 64 on page 71 and Figure 85.
fourth module and so on until all modules are connected to the router. Ensure
the power is off before proceeding with steps 7 and 8.
Get other manuals https://www.bkmanuals.com
1
2
3
4
5
6
7
WAN
4
Library controller card terminator connection
5
10BaseT connections
Advertisement
Table of Contents
