Front Panel Operation - INSIGHT DLP DIRECTOR 1000 Hardware Installation Manual

10. Front Panel Operation

Press the Power Button once to power the appliance on.
A A B C D E F B C D
H I H I
A System ID Button with Integrated LED
B NMI Button (recessed, tool required for use)
C SPAN Activity LED
D eth3 Activity LED
E System Cold Reset Button
F Hard Drive Activity LED
G Power Button with Integrated LED
H MGMT Activity LED
I DLP Activity LED
INSIGHT DLP DIRECTOR 1000 & 2000 Appliance Hardware Installation Guide
E F G G
System System
Status LED Status LED
See Detail Illustration and See Detail Illustration and Chart See Detail Illustration and
for Front Panel Information for Front Panel Information for Front Panel Information
USB Ports USB Ports
Video Port Video Port
System Status LED
There is a bi-color (Green/Amber) LED on the Front Panel (shown on
the left). The LED operation is defined in the following table.
LED Color System State
OFF System is not operating
GREEN Solid - On
GREEN ~1 Hz blinking
AMBER ~1 Hz blinking
AMBER Solid - On
Chart
2 4
1 3
ID
Criticality
Not ready
OK
Degraded - system is
operating in a degraded state
although still functional, OR
system is operating in a
redundant state but with an
impending failure warning
Non-critical - system is
operating in a degraded
state with an impending
failure warning, although
still functioning
Critical, non-recoverable -
system is halted
www.insightdlp.com Page 12