Do you have a question about the GM-800 and is the answer not in the manual?
Questions and answers
Marcos Silva
February 4, 2025
Can you split the parts in zone? eg. Part 1 - Bass on strings E (6th) and A (5th), Part 2 Organ, Part 3 - E. Piano, Part 4 - Lead solo on strings B (2nd) and E (1st)?
1 comments:
Mr. Anderson
February 10, 2025
Yes, the Boss GM-800 can split parts in zones for different instruments. It allows assigning tones to specific fret ranges using its advanced pitch detection, and the Position Limit feature lets users set lower and upper frets per string.
Press this to save the scene settings or to copy. Rear Panel (Connecting the Equipment) GK IN jack MIDI (OUT/IN) connectors Connect a guitar or bass equipped with the BOSS Divided These connectors transmit and receive MIDI messages to/from Pickup (GK-5/GK-5B) to this connector. connected external MIDI devices.
Page 3
Connect a USB flash drive. Connect or disconnect the USB flash Connect the included AC adaptor here. drive while the GM-800 is powered off. * The DC IN jack also serves as the power switch. The power turns * Never turn off the power or remove the USB flash drive while...
Specifying the Device Connected to OUTPUT Jacks (OUTPUT SELECT) ¹ To use the GM-800, your guitar or bass guitar must have a divided pickup (GK pickup) installed that can output independent signals for each separate string, such as the BOSS Press the [MENU] button.
PIEZO R (RMC). *1 Make settings for the divided pickup in order to ensure that you’ll always be playing the GM-800 in the optimal state. The GM-800 GK-5B Choose this if you’re using a BOSS GK-5B. can save twenty types of these settings (GK SETTING).
Areas which icons Sound will not be output MUTE are displayed while tuning. While tuning, the sound that’s BYPASS input to the GM-800 will be OUTPUT output without change. Icon Explanations Allows you to tune while THRU hearing the current effect Indicates the input level.
• Do not remove the device while reading/writing is in progress. • Roland and BOSS are either registered trademarks or trademarks of • To prevent damage from static electricity, discharge all static Roland Corporation in the United States and/or other countries.
Main Specifications 246 (W) x134 (D) x 63 (H) mm (without rubber foot) 9-11/16 (W) x 5-9/32 (D) x 2-31/64 (H) inches (without rubber foot) Dimensions 246 (W) x134 (D) x 65 (H) mm (including rubber foot) 9-11/16 (W) x 5-9/32 (D) x 2-9/16 (H) inches (including rubber foot) 1.2 kg Weight (excluding AC adaptor)
Need help?
Do you have a question about the GM-800 and is the answer not in the manual?
Questions and answers
Can you split the parts in zone? eg. Part 1 - Bass on strings E (6th) and A (5th), Part 2 Organ, Part 3 - E. Piano, Part 4 - Lead solo on strings B (2nd) and E (1st)?
Yes, the Boss GM-800 can split parts in zones for different instruments. It allows assigning tones to specific fret ranges using its advanced pitch detection, and the Position Limit feature lets users set lower and upper frets per string.
This answer is automatically generated