Dell SCv2080 Owner's Manual page 43

Back-Panel Ports Connectors (per Storage Controller)
USB Connector One USB 3.0 connector used for Storage Center updates
Serial connector
LED Indicators
Front panel •
•
•
•
•
•
Drawer •
•
•
•
•
Disk Drive In Carrier One single-color LED for drive fault status
(DDIC)
6 Gb SAS IO module 14 one-color LED status indicators, four each for the three SAS ports and two
for the module status
•
Cooling module
•
•
Power Supply Unit (PSU) •
•
•
Power Supplies
AC power supply (per power supply)
Wattage 2.8 kW
Voltage 200–240 VAC (16 A)
Heat dissipation 191-147 W
Input frequency 50/60 Hz
Max input power 1791 VA
Input current 7.4 A@241 VAC
SCv2080 Technical Specifications
NOTE: SAS connectors are SFF-8086/SFF-8088 compliant.
NOTE: Not for customer use.
One two-digit LCD indicator for Unit ID, error code, and unit location
identifier
One two-color LED indicator for power status
One single-color LED indicator for module fault status (enclosure as a
whole)
One single-color LED indicator for logical fault status (drive, HBA, RAID
controller, and so on)
One single-color LED indicator for drawer 1 fault status
One single-color LED indicator for drawer 2 fault status
One single-color LED indicator for sideplane card and power status
One single-color LED indicator for drawer fault status
One single-color LED indicator for logical fault status
One single-color LED indicator for cable fault status
Six single-color LED indicators for data transfer status
One single-color LED indicator for module status
One single-color LED indicator for battery fault status (not currently used)
One single-color LED indicator for fan fault status
One single-color LED indicator for PSU fault status
One single-color LED indicator for AC power fault status
One single-color LED indicator for power status
Get other manuals https://www.bkmanuals.com
43