Caution Statements - Hitachi air Core 600 Installation & Maintenance Manual

Alert Symbols ：
DANGER
: The symbol refers to a hazard which can result in severe personal injury or death.
: The symbol refers to a hazard or an unsafe practice which may result in severe personal injury
WARNING
or death.
: The symbol refers to a hazard or an unsafe practice which may result in personal injury,
CAUTION
product or property damage.
NOTE : It refers to the remarks and instruction to the operation, maintenance, and service.
This air conditioner must be installed properly by qualified personnel in accordance with the installation
instructions provided with the unit.
regulations.
Before installation, check if the voltage of the power supply at installation site is the same as the voltage
shown on the nameplate.
DANGER
WARNING
The appliance shall be installed in accordance with national wiring
You must not carry on any transformation to this product, otherwise, it may possibly
cause such consequences as water leakage, breakdown, short-circuit, electric
shock, fire, etc.
Work such as tube line welding, etc. should be carried out far away from the
flammable explosive material vessels, including the air conditioner refrigerant, to
guarantee the security of the site.
To protect the air conditioner from heavy corrosion, avoid installing the outdoor unit
where salty seawater can splash directly onto it or in sulphurous air near a spa. Do
not install the air conditioner where excessively high heat-generating objects are
placed.
If the supply cord is damaged, it must be replaced by the factory or its service department
in case of danger.
The place where this product is installed must have the reliable electrical earth facility
and the equipment. Please do not connect the grounding of this product to various kinds
of air-feeding tube lines, the drain lines, the lightning protection facility as well as other
tube lines to avoid receiving an electric shock and damages caused by other factors.
Wiring must be done by a qualified electrician. All the wiring must comply with the local
electrical codes.
Monitor the capacity of the electric current with your electrical kilowatt-hour meter wires
and socket before installation.
The power wire where this product is installed must have the independent leakage
protective device and the electric current over-load protection device which are
provided for this product.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Means for disconnection, which can provide full disconnection in all poles, must be
incorporated in the fixed wiring in accordance with the wiring rules .
Type and rating of circuit breakers/ELB is detailed in "Installation and Maintenance
part. If the fuses in units blows, please call the service agency to replace it with
a new one. Please do not replace it by yourself, or else it may result in accident, for
example, electric shock.
The cord of the H07RN-F type or the electrically equivalent type must be used for
power connection and interconnection between outdoor unit and indoor unit.
The size of the cord is detailed in "Installation and Maintenance" part.
If not, it will cause an electric shock or a fire.
10

Caution Statements