Dismantling of the Main & Tuner PCB
1) Loosen 10 screw " D " at the back panel as shown in figure
6.
2) Loosen 4 screw " E " on the top of main board and loosen
2 screw on the bottom panel as shown in figure 7
Figure 6
E
All manuals and user guides at all-guides.com
3-2
D
E
Figure 7
SERVICE POSITIONS
Service position A
Note: In some service positions the components or copper patterns of one board may risk touching its neighbouring pc
boards or metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
Service position B
3-2