Contents 1 Important Safety Notice 2 Your Wireless speaker Introduction What's in the box Overview of the speaker 3 Get started Connect power Google home APP 4 You can also use a BLUETOOTH speaker Connect a Bluetooth device Play from a connected Bluetooth device Disconnect a device Reconnect a device...
• If your speaker gets wet, clean with a soft dry cloth and then let it dry Conformity on completely in a well-ventilated www.philips.com/support. place before use next time. Care of the environment Note Disposal of your old product •...
Page 4
2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries.
2 Your wireless speaker Congratulations on your purchase, and your product at www.philips.com/ welcome. Introduction With this speaker, you can enjoy audio from Bluetooth-enabled devices or play network audio resources. • Speaker • Adapter • Printed materials What's in the box...
Overview of the speaker DC IN Wireless charging/ Vol+/ Wireless charging 1 step down (Short press) continous steps up Mute/ (Long press 3s or 3s+) USB charging port Push to talk/ Charge your mobile devices Push to talk(Short press) Max output 5V 1A current standby (Long press 3s) Power adapter jack...
3 Get started Always follow the instructions in this chapter in sequence. Connect power Caution Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. Risk of electric shock! When you unplug the AC plug, always pull the plug from the socket.
“Google Home”APP “Google Home”APP Place the unit as close as possible to a wireless LAN router. Establish a wireless connection from your smartphone/iPhone to the wireless LAN router. Take a note of the SSID and the password(encryption key) of the connected wireless LAN router.
You can also use as a • can open BTpairing by voice,“Ok, BLUETOOTH speaker google open the bluetooth”/ “Ok,google bluetooth pairing”. speaker will be waiting status,for With this speaker, you can listen to pairing other Bluetooth device. audio from Bluetooth-enabled devices Form your smartphone or other and play music through Bluetooth.
Play from a connected Set clock Bluetooth device Automatically setup and display after After successful Bluetooth connection, networking. play audio on the connected device. » Audio streams from your Bluetooth device to the speaker. • To pause or resume play, press •...
5 Other features Adjust volume Note • Product information is subject to change During music playback,press without prior notice. increase or decrease volume. Rated output 2 x 8 W Acousic 60-20000 Hz • You can press and hold to increase or frequency decrease volume continuously.
WIFI 5GHz(5470 -5725MHz): 17.92dBm before requesting service. If the problem WIFI 5GHz(5725-5850MHz):13.84dBm remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the In all EU member states, operation of •...
Page 14
This product has been manufactured by,and is sold under the responsibility of MMD Hong Kong Holding Limited,and MMD Hong Kong Holding Limited.is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.and are used under license.