Dispensing Beverages; Doubleshot And Tripleshot; Dispensing A Coffee Beverage With Milk - Siemens EQ.700 classic TP7 Series Information For Use

en operation
7.2 Dispensing beverages
Find out how to prepare a drink of
your choice.
WARNING
Risk of scalding!
Freshly prepared drinks are very hot.
▶
Leave drinks to cool down if ne-
cessary.
▶
Do not let escaping liquids or
steam come into contact with your
skin.
Notes
With a number of settings your cof-
¡
fee is prepared in several steps.
Wait until the process is fully com-
pleted.
If you are dispensing a beverage
¡
with milk, always connect a con-
tainer filled with milk to the milk
hose and suction pipe.
If the milk system has not been
¡
cleaned, small amounts of milk
may escape when hot water is dis-
pensed.
7.3 doubleShot and tripleShot
Your appliance grinds the coffee two
or three times.
To ensure that only pleasant-tasting
and easily digestible aromatic sub-
stances are released, coffee beans
are freshly ground and brewed again
by the appliance.
The longer coffee brews, the more
bitter substances and undesirable
aromas are released. These bitter
substances and undesirable aromas
affect the taste and digestibility of
coffee.
Note: The functions "doubleShot" and
"tripleShot" depend on the beverage
strength and beverage size selected.
16
7.4 Dispensing a coffee
beverage with milk
An example explains how to make a
latte macchiato.
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
▶
Never touch the milk system when
it is hot.
▶
Allow the hot milk system to cool
down before touching it.
Requirements
The milk hose with the suction
¡
pipe is connected to the milk sys-
tem.
The suction pipe is immersed in
¡
milk.
Place a glass underneath the
1.
beverage outlet.
Press "Classic".
2.
Select and press the beverage
3.
symbol for latte macchiato.
To change the strength, press ⁠ .
‒
To change the per-cup quantity,
‒
press ⁠ .
To change the milk ratio, press
‒
⁠ .
Press "Start" and wait until the pro-
4.
cess is complete.
To completely stop dispensing
‒
the beverage, press "Stop".
To only stop the current dis-
‒
pensing step, press "Skip".
After preparing the beverage, the
milk system will automatically
clean itself with a short jet of
steam.
Notes
If you do not change any settings
¡
for approx. 30 seconds, the appli-
ance will exit settings mode.