Toshiba Satellite Pro R50-D Series User Manual page 92

displays including TVs as extended screens. With wireless display,
documents, streamed/local media contents or other online contents can be
shared wirelessly with others.
To use wireless display, either one of the following devices is required:
To wirelessly connect to an external display, you can follow the steps as
described below:
1.
2.
3.
After the connection is established, the name of the wireless display device
appears under Projectors.
To disconnect the Wireless display device, click the wireless display device
name and then click Remove device.
Changing the external playback settings
After one or more external displays are connected, the operating system
can automatically detect, identify, and set up the display settings.
You can also manually manage how the external displays work and change
the display settings by pressing P while holding down the Windows (
key. If you disconnect the external display before you turn off the
computer's power, be sure to switch to the internal display.
When you change the display output device, the audio playback device
might not switch automatically. In this case, in order to set the playback
device to the same device as the display output device, adjust the audio
playback device manually by the following steps:
1.
2.
3.
4.
5.
User's Manual
A compatible external display with built-in support for wireless display.
An external display with HDMI™ port and a wireless display adaptor.
The wireless display adaptor is a device that connects to the external
display via HDMI™ port and can receive Wi-Fi
computer.
Go to (Settings) and click Devices -> Connected devices.
Click Add a device. Your computer starts searching for the wireless
display device.
After the wireless display device is searched, follow the on-screen
instructions to finish connection.
Click Start -> Windows System -> Control Panel -> Hardware and
Sound -> Sound.
In the Playback tab, select the playback device which you want to
switch to.
To use the internal speakers on your computer, select Speakers. To
use the television or the external monitor that you have connected to
the computer, select a different playback device.
Click the Set Default button.
Click OK to close the Sound dialog.
®
signals from your
)
4-37