Viking VWH3010 Installation Manual page 12

Professional built-in hoods

Hide thumbs Also See for VWH3010:

Table of Contents

Attach with screws and lock washers provided.

Remove electrical box cover.

Flip hood over. Insert 6" of electrical wiring through the top

of vent hood and secure. Refer to local codes.

To reduce the risk of fire, electric shock, or injury

to persons, observe the following:

• Use this unit only in the manner intended by the

manufacturer. If you have any questions, contact

the manufacturer.

• Before servicing or cleaning unit, switch power off

at service panel and lock service panel to prevent

power from being switched on accidentally. When

the service disconnecting means cannot be locked,

securely fasten a prominent warning device, such

as a tag, to the service panel.

CAUTION: Secure vent hood. Make sure

mounting screws are secured into framing. Use additional

Attach with screws.

W A R N I N G

mounting screws and wall anchors, if necessary.

Table of Contents

Vwh3610