Tire Changing - GMC Sierra Denali 2500HD 2014 Owner's Manual

GMC Sierra Denali 2500HD and 3500HD (GMNA-Localizing-U.S./Canada-
7142957) - 2014 - CRC 1st Edition - 3/28/13

Tire Changing

Removing the Spare Tire and
Tools
A. Wing Nut Retaining the Wheel
Blocks
B. Wheel Blocks
C. Retaining Bolt
D. Jack
E. Jack Knob
F. Tool Kit and Jack Tools
G. Retaining Bracket and Wing Nut
The equipment needed to change a
flat tire is stored under the
passenger side second row seat.
The spare tire is located underneath
the vehicle.
1. Fold the second row seat
cushion up to access the jack
and tools.
2. Turn the jack knob (E)
counterclockwise to lower the
jack head slightly to release the
jack (D) from its holder.
3. Turn the wing nut retaining the
wheel blocks (A)
counterclockwise to remove the
wheel blocks (B) and the
retaining bolt (C).
4. Turn the wing nut (G), used to
retain the storage bag and tools,
counterclockwise . to remove it.
Use the jack handle extensions and
the wheel wrench to remove the
underbody-mounted spare tire.
Black plate (67,1)
Vehicle Care
A. Spare Tire (Valve Stem
Pointed Down)
B. Hoist Assembly
C. Hoist Cable
D. Tire/Wheel Retainer
E. Hoist Shaft
F. Hoist End of Extension Tool
G. Hoist Shaft Access Hole
H. Wheel Wrench
I. Jack Handle Extensions
J. Spare Tire Lock (If Equipped)
10-67