Table of Contents
Advertisement
Care
Care and Cleaning
� CAUTION
Units I
■
Indoor unit and remote controller
1. Wipe them with a dry soft cloth.
■
Front panel
1. Open the front panel.
• Hold the front panel by the indentations
in the main unit and open the front panel.
2. Remove the front panel.
• Slide the front panel to either the left
or right and pulling it toward you.
This will disconnect the front panel
shaft on one side.
• Disconnect the front panel shaft on
the other side in the same manner.
• You can also remove the front panel
by pushing it open until the front
panel shaft is disconnected.
3. Clean the front panel.
• Wipe it with a soft cloth soaked in water.
• Only neutral detergent may be used.
• In case of washing the panel with water, wipe it with dry soft cloth, dry it up in the shade after washing.
4. Attach the front panel.
• Align the front panel shaft on the left
and right of the front panel with the
slots, then push them all the way in.
• Close the front panel slowly.
• Press the front panel at both sides
and the center.
12
Before cleaning, be sure to stop the operation and
turn off the circuit breaker.
�
�
f!la
Front
panel shaft -
.
.
.
.
.
D
Advertisement
Table of Contents
