Preface; Use Of Symbols - Epec 6200 Manual

PREFACE

1
1.1

Use of Symbols

This manual uses the following symbols to point out important information or safety
instructions:
The following symbols may be used on Epec's product labels:
Epec Oy
Tiedekatu 6
FIN-60320 Seinäjoki
6200 Technical Manual
The information icon indicates important information and issues to be
noted for the reader.
The caution icon indicates very important information or a warning. If the
advices are ignored, it can result in personal injury or damage to software
or equipment.
The (electrical) warning icon indicates a hazard which could cause an
electrical danger and/or a personal injury.
Caution, surface may be hot.
CE compatibility
This symbol indicates that the product complies with the
requirements set in the CE Standard.
WEEE symbol
This symbol indicates that the product must be sent to separate
collection facilities for recovery and recycling when the end-user
wishes to discard the product.
E17 Approval
This symbol indicates that the product is certified with normal
automotive (E17) EMC (electromagnetic compatibility) standards.
FCC Logo
FCC Logo Devices authorized under the SDoC procedure have the
option to use the FCC logo to indicate compliance with the FCC rules,
12 and the logo may be included in the instruction materials or as
part of an e-label.
RCM (Regulatory Compliance Mark)
This symbol indicates that the product complies with the ACMA
(Australian Communications and Media Authority) regulatory
arrangements concerning electromagnetic compatibility and radio
equipment.
Epec Oy reserves all rights for improvements without prior notice
Postal address
PL/P.O.Box 194
FIN-60101 Seinäjoki, Finland
MAN000719
Phone
+358-(0)20-7608 111
Page 4
PUBLIC
Internet
www.epec.fi