AEG CTV 4859 LCD/DVB-T Operating Instructions Manual page 55

19" TFT LCD TV CTV 4859 LCD/DVB-T
MENU SCREENS
PC Menu (only for PC monitor mode: ADJUST).
You can select H-Position, V- Position, Clock, Phase, Auto-Config
by pressing PROG+/-
You can adjust
HPOS: (picture: horizontal position)
VPOS: (picture: vertical position)
CLOCK: Press the VOL+/- to minimize any vertical bars or stripes
visible on the screen background.
PHASE: When necessary, adjust the pixel phase of the picture to
avoid picture interference.
AUTO CONFIG: To adjust the screen settings automatically. It will
take a few seconds and during this process the screen will be
black.
Note
If the set is cold, there may be a small "flicker" when the set is
switched on. It is normal. There is nothing wrong with the set. If
possible, use the VESA 1024X768@60HZ video mode to obtain
the best image quality for your LCD monitor. Under other
resolutions some scaled or processed pictures may appear on the
screen. Some dot defects may appear on the screen, like red,
GB
green or blue Spots, however, this will have no impact or effect on
the monitor performance. Do not press the LCD screen with your
finger for a long time as it may incur some damage to the screen.
55