Installation - AEG CTV 4859 LCD/DVB-T Operating Instructions Manual

3

Installation

19" TFT LCD TV CTV 4859 LCD/DVB-T
Thank you very much for your purchase of this product. To enjoy
your set to the full from the very beginning, read this manual
carefully and keep it handy for ready reference.
Locate the TV -Set in the room where direct light does not strike
the screen. Total darkness or a reflection on the picture screen
can cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
Allow enough space between the TV- Set and the wall to permit
ventilation.
Avoid excessively warm locations to prevent possible damage
to the cabinet or premature component failure.
This TV operates on a DC supply provided by the AC-DC
adaptor. The voltage is as Indicated on the label on the back
cover. Only use the AC-DC adaptor supplied with the TV and
never apply an AC mains to the TV directly. The AC-DC
adaptor operates on and AC mains supply, the voltage is as
indicated on the label of the AC-DC adaptor. Connect the DC
plug of the AC-DC adaptor to the DC 12 V socket at the rear
side of the TV. Connect the AC-DC adaptor and its mains cord.
Insert the mains plug in the wall socket having a mains voltage
of 230 V/50 Hz.
Do not install the TV -Set in a location near heat sources such
as radiator, air ducts, direct sunlight, or in a place somewhere
like close compartment and close area.
Do not cover the ventilation openings when using the set.
Intended Use
This device is exclusively determined for the reception and replay
of image and sound signals.
Any other use is considered non-intended use and is prohibited.
The device must not be used for commercial purpose.
INSTALLATION
GB
43