Table of Contents Power Module List ......................3 Power Module Specification ..................... 4 GFPS-0202 ......................4 GFPS-0303 ......................5 Power Module Information ....................6 Power Module Dimensions ..................6 Power Module Panel Information ................8 Module Installation/Disassembly ..................10 Installation ......................10 Removal ......................
4. Module Installation/Disassembly 4.1 Installation I. Align the red arrow on the side of the module to the arrow on the DIN rail. II. Press the module down and the metal clamp will slide (thanks to its spring mechanism) and grab on the other side of the DIN rail. Continue to push down until the metal clamp “clicks”.
4.2 Removal I. Use a screwdriver to pull the metal hook sideways and detach the module from the DIN rail. II. Remove all modules from the DIN rail in reverse order of installation.
5. iO-GRID M Series Introduction iO-GRID M series utilizes the standard Modbus communication protocol and supports Modbus RTU/ASCII and Modbus TCP. Please choose products and factory controllers to figure your system based on your communication protocol. 5.1 iO-GRID M Components I.
6. Power Module Instructions 6.1 Power Module Assembly and Connections Install the fieldbus to the DIN rail II. Install GFPS-0202 to the fieldbus and GFPS-0202 will convert the alternating current from the external power supply into 24V direct current and feed it to the fieldbus...
Page 14
III. Install GFPS-0303 to the fieldbus and GFPS-0303 will convert the 24V direct current from the fieldbus into 5V direct current before feeding it to the fieldbus IV. Plug the external alternating current power supply to the “L”, “N” and “G” connectors on GFPS-0202 accordingly...