Adjusting Sound Settings - Samsung 3 Series User Manual

Sound Effect
■
O
→ Sound → Sound Effect →
MENUm
(standard sound mode only)
Use the buttons to select an option, and then press ENTERE.
u/d
✎
If Speaker Select is set to External Speaker, Sound Effect is disabled.
Equalizer
•
Use Equalizer to customize sound setting for each speaker.
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the volume level of specific
bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
Speaker Settings
■
O
MENUm → Sound → Speaker Settings →
Speaker Select
• t
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio
receiver. In this case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker, the volume and
and the sound settings will be limited.
✎
When Speaker Select is set to External Speaker, you should use these settings.
TV Speaker: Off, External Speaker: On
•
✎
When Speaker Select is set to TV Speaker, you should use these settings.
TV Speaker: On, External Speaker: ON
•
Auto Volume
•
Normal equalizes the volume level on each channel, so that when you change channels, the volume
level is the same.
Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is
useful at night, when you may want to keep the volume low.
✎
To use the volume control on the source device connected to the TV, set Auto Volume to Off on
the TV. Otherwise, a change to the volume control of the source device may not be applied.
TV Installation Type
•
Specify the TV's installation type. Choose between Wall Mount and Stand to optimise the TV's sound
automatically.

Adjusting Sound Settings

ENTERE
ENTERE
English - 29
MUTE buttons will not operate