Removing & Installing Body Components
Seat
Tab
Recess
Stays
72
Prongs
Seat
Ignition key
Seat lock
Seat
u
#
Removal
Insert the ignition key into the seat lock,
1.
and turn the key clockwise to unlock the
seat.
Pull the seat back and up.
2.
#
Installation
Insert the front tab and rear prongs into
1.
the front recess and rear stays on the
frame.
Push forward and down on the rear of the
2.
seat until it locks in place.
Make sure that the seat is locked securely
in position by pulling it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the seat.