Advertisement
Quick Links
Fitting Instructions - Read instructions carefully before fitting and follow them for correct use
IN8029
ULTI Rack
1
1
5
This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for
manufacturing purposes, copied nor communicated in any way to third parties without written
permission from VAN GUARD ACCESSORIES LTD.
IN8029_D
2
2
6
7
8
4
3
3
9
10
11
# PART NO. QTY
1
AS3003
2
AS3004
3
AS3159
4
ME0021
# PART NO. QTY
4
1
FX4008 (M8)
2
FX4027 (M8X55)
3
FX4139 (M8X20)
4
FX4001 (M8X40)
5
FX4007
12
6
MA6007
7
FX4036 (M8)
8
FX4011 (M8)
9
FX4012 (M6X16)
10
FX4010 (M6)
11
FX4017 (M6)
12
FX4126 (M6)
Van Guard Accessories Ltd
Fair Oak Close, Exeter Airport Business Park,
Exeter, Devon, EX5 2UL
www.van-guard.co.uk
IN8029 - PAGE 1 OF 7
-
3
1
6
1
6
2
2
2
4
2
6
12
12
12
12
Advertisement
Related Manuals for Van Guard ULTI Rack
Summary of Contents for Van Guard ULTI Rack
- Page 1 FX4126 (M6) Van Guard Accessories Ltd This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for Fair Oak Close, Exeter Airport Business Park, manufacturing purposes, copied nor communicated in any way to third parties without written Exeter, Devon, EX5 2UL permission from VAN GUARD ACCESSORIES LTD.
- Page 2 VGUR-066 578mm 579mm Vehicle: Vauxhall Vivaro: 2014 on Renault Trafic: 2014 on Wheel Base: SWB (L1) Roof Height: High (H2) 3098mm Rear Doors: Twin 360mm 530mm 1157mm 4998mm 2200mm VGUR-067 472mm 473mm 578mm 579mm Vehicle: Vauxhall Vivaro: 2014 on Renault Trafic: 2014 on Wheel Base: LWB (L2) Roof Height: High (H2) 3498mm...
-
Page 3: Tools Required
TOOLS REQUIRED ME0021 10MM X 1 13MM X 1 FX4008 (M8) X1 (SUPPLIED IN FIXING KIT) ME0182 X1 (SUPPLIED IN FIXING KIT) Secure the fixing clips (FX4126) to the vehicles fixing points as shown below. Secure the roof brackets to the vehicles fixing points using M6x16 hex bolts, M6 shakeproof washers and M6 washers. - Page 4 Loosely secure roof bars to the roof brackets using M8x55 coach bolts and M8 Adjust the roof bars to ensure that they’re evenly spaced on the vehicle. flange nuts. Tighten the M8 flange nuts. (WITH (WITHOUT ROLLER BRACKET) ROLLER BRACKET) (WITHOUT (WITH ROLLER BRACKET)
- Page 5 Assemble the side rails together using 1X M8x40 button bolt. Tighten using the Lift the side rails into position. Ensure that the side rails are connected to the roof supplied tool (FX4008). Repeat for the other side. bars correctly as per step 8.2. M8 NYLOC NUT ALREADY IN PLACE Adjust the position of the side rails to suit the rear roller.
- Page 6 Push on the lever to secure the 3X fixed roof bars into positon. Place the remaining roof bars into position. See page 2 for the recommended distances between the roof bars. Once in position push on the lever to secure in place.
- Page 7 Push the plastic bungs into position (X4). Check bars are fully secured. Once the product has been fitted check fixings and parts to ensure they have been fully secured and tightened. Check fixings and parts at regular intervals. Any damaged or worn parts must be immediatey removed from the vehicle and replaced. NOTES: Maximum load capacity: 100KG (Including rack weight - please refer to page 2.) (Maximum load must be in accordance with the vehicle manufacturer’s load bearing capacity.