Advertisement
Quick Links
Fitting Instructions - Read instructions carefully before fitting and follow them for correct use
IN8170
Bulkhead - VG240S / VG240P
VG240S = ME0382
VG240P = ME0383
(BULKHEAD)
CAUTION - IMPORTANT NOTES
Please read these notes carefully before attempting to fit this product.
1. Regularly inspect all fixings and parts. Any damaged or worn parts should be immediately removed the
vehicle and replaced.
2. Retain instructions for future use.
3. It is important that the end user receives this document.
This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for
manufacturing purposes, copied nor communicated in any way to third parties without written
permission from VAN GUARD ACCESSORIES LTD.
IN8170_B
X1
FX4016
X2
X1
(M6)
FX4046
X2
(M6X45)
FX4018
X2
FX4019
(M8X20)
TOOLS REQUIRED
SPANNER (10MM) X1
SPANNER (13MM) X1
X2
FX4109
(M8)
(M6)
!
Van Guard Accessories Ltd
Fair Oak Close, Exeter Airport Business Park,
Exeter, Devon, EX5 2UL
www.van-guard.co.uk
IN8170 - PAGE 1 OF 2
X2
Advertisement
Related Manuals for Van Guard VG240S
Summary of Contents for Van Guard VG240S
- Page 1 3. It is important that the end user receives this document. Van Guard Accessories Ltd This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for Fair Oak Close, Exeter Airport Business Park, manufacturing purposes, copied nor communicated in any way to third parties without written Exeter, Devon, EX5 2UL permission from VAN GUARD ACCESSORIES LTD.
- Page 2 Bend the two side tabs up (the same way as the side end returns). Take care to Position the bulkhead into the vehicle and rest on the vehicles existing bottom weaken the tabs by bending them the wrong way. bulkhead. Ensure that the bulkheads returns are facing into the load area as shown in step 1.1.