Advertisement
Quick Links
Fitting Instructions - Read instructions carefully before fitting and follow them for correct use
IN8004
ULTI Rack
1
1
5
This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for
manufacturing purposes, copied nor communicated in any way to third parties without written
permission from VAN GUARD ACCESSORIES LTD.
IN8004_B - IW - 30/03/2016
2
2
6
7
8
3
4
3
# PART NO. QTY
5
1
AS3007
2
AS3009
3
AS3161
4
AS3154
5
AS3155
# PART NO. QTY
4
1
FX4008 (M8)
2
FX4034 (M6X60)
3
FX4035 (M8X20)
4
FX4001 (M8X40)
5
FX4007
6
MA6007
7
FX4036 (M8)
8
FX4016 (M6)
Van Guard Accessories Ltd
Fair Oak Close, Exeter Airport Business Park,
Exeter, Devon, EX5 2UL
www.van-guard.co.uk
IN8004 - PAGE 1 OF 7
-
4
1
4
4
1
16
2
2
2
4
2
16
Advertisement
Related Manuals for Van Guard VGUR-016
Summary of Contents for Van Guard VGUR-016
- Page 1 FX4016 (M6) Van Guard Accessories Ltd This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for Fair Oak Close, Exeter Airport Business Park, manufacturing purposes, copied nor communicated in any way to third parties without written Exeter, Devon, EX5 2UL permission from VAN GUARD ACCESSORIES LTD.
- Page 2 VGUR-016 450mm 450mm 450mm 450mm 450mm 450mm Vehicle: Ford Transit: 2000 - 2014 Wheel Base: MWB (L2) Roof Height: Medium (H2) Rear Doors: Twin 3300mm 900mm 900mm 900mm 5230mm 3200mm VGUR-017 450mm 450mm 450mm 450mm 450mm 450mm 450mm Vehicle: Ford Transit: 2000 - 2014...
- Page 3 TOOLS REQUIRED 10MM X 1 AS3155 AS3154 13MM X 1 FX4008 (M8) X1 (SUPPLIED IN FIXING KIT) ME0182 X1 AS3155 (SUPPLIED IN FIXING KIT) AS3154 Loosely secure the pre-assembled gutter brackets on to the roof bars using M6x60 Place the roof bar assemblies onto the gutter and position them using the coach bolts and M6 flange nuts.
- Page 4 Tighten the roof bar fixings. Tighten the gutter clamp fixings. TIGHTEN TIGHTEN Lift the rear side rail sections into position (A2 & B2). Ensure that the side rails are connected to the roof bars correctly as per step 5.3. (WITH (WITHOUT ROLLER BRACKET) ROLLER BRACKET)
- Page 5 Adjust the position of the rear side rails to suit the rear roller. Push on the lever to secure the 2X rear fixed roof bars into positon. Lift the front side rail sections into position (A1 & B1). Ensure that the side rails are connected to the roof bars correctly as per step 5.3.
- Page 6 Slide the front side rail upto the rear side rail and secure together using 1X M8x40 Push on the lever to secure the 2X front fixed roof bars into positon. button bolt. Tighten using the supplied tool (FX4008). Repeat for the other side. M8 NYLOC NUT ALREADY IN PLACE Secure the roller spigot to the left hand roller bracket only using a M8x20 hex bolt...
- Page 7 Assemble the roller spigot, M8x20 hex bolt and M8 shakeproof washer together. Push the plastic bungs into position (X4). Place the assembly into the roller. Slide the roller onto the spigot fitted in step 12 and drop the other end into position. Tighten using the supplied tool (ME0182). Check bars are fully secured.