Table of Contents
Advertisement
3
3
Maintenance and Service
Any safety screen or guard removed for servicing must be re-
placed prior to operating the appliance.
When properly maintained, your appliance will give you
many years of trouble-free service. We recommend an-
nual service by a qualifi ed technician.
A. Maintenance Tasks-Homeowner
Installation and repair should be done by a qualifi ed technician
only. The appliance should be inspected before use and at least
annually by a professional service person.
The following tasks may be performed annually by the ho-
meowner. If you are uncomfortable performing any of the
listed tasks, please call your dealer for a service appoint-
ment.
More frequent cleaning may be required due to lint from
carpeting or other factors. Control compartment, burner
and circulating air passageway of the appliance must be
kept clean.
CAUTION! Risk of Burns! The appliance should be
turned off and cooled before servicing.
Glass Cleaning
Frequency: Seasonally
By: Homeowner
Tools Needed: Protective gloves, glass cleaner, drop cloth
and a stable work surface.
CAUTION! Handle fi xed glass assembly with care.
Glass is breakable.
•
Avoid striking, scratching or slamming glass
•
Avoid abrasive cleaners
•
DO NOT clean glass while it is hot
•
Prepare a work area large enough to accommodate fi xed
glass assembly and door frame by placing a drop cloth
on a fl at, stable surface.
Note: Fixed glass assembly and gasketing may have resi-
due that can stain carpeting or fl oor surfaces.
•
Remove door or decorative front from appliance and set
aside on work surface.
•
See Section 15 for instructions to remove fi xed glass
assembly.
•
Clean glass with a non-abrasive commercially available
cleaner.
- Light deposits: Use a soft cloth with soap and water
- Heavy deposits: Use commercial fi replace glass cleaner
(consult with your dealer)
•
Carefully set fi xed glass assembly in place on appliance.
Hold glass in place with one hand and secure glass
latches with the other hand.
•
Reinstall door or decorative front.
14
All manuals and user guides at all-guides.com
Heatilator • Novus NDV Series • 4055-187 Rev. AA • 10/13
Doors, Surrounds, Fronts
Frequency: Annually
By: Homeowner
Tools needed: Protective gloves, stable work surface
•
Assess condition of screen and replace as necessary.
•
Inspect for scratches, dents or other damage and repair
as necessary.
•
Check that louvers are not blocked.
•
Vacuum or dust surfaces.
Remote Control
Frequency: Seasonally
By: Homeowner
Tools needed: Replacement batteries and remote control
instructions.
•
Locate remote control transmitter and receiver.
•
Verify operation of remote. Refer to remote control
operation instructions for proper calibration and setup
procedure.
•
Place batteries as needed in remote transmitters and
battery-powered receivers.
•
Place remote control out of reach of children.
If not using your fi replace for an extended period of time
(summer months, vacations/trips, etc), to prevent unin-
tended operation:
•
Remove batteries from remote controls.
•
Unplug 3 volt adapter plug on IPI models.
Advertisement
Table of Contents
