Table of Contents
Advertisement
en Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching on the fan settings
Switching the fan run-on on or off
Resetting the odour filter saturation indicator
Resetting the grease filter saturation indicator
Switching the lighting on or off
Setting the brightness
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Note: When using it in circulating-air mode, you require
additional accessories.
7 Basic operation
7.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
7.2 Switching off the appliance
Press
.
▶
7.3 Setting a fan setting
To set a higher fan setting, turn the control ring
1.
clockwise.
6
5.2 Display
You can see the current setting values in the display.
Grease filter saturation indicator
Odour filter saturation indicator
-
Fan settings
Duration of the run-on
/
Intensive modes 1/2
When using it in circulating-air mode, set the operat-
▶
ing mode.
To set a lower fan setting, turn the control ring anti-
2.
clockwise.
a The selected fan setting appears on the display.
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
To switch on intensive mode 1, turn the control ring
1.
clockwise until
appears on the display.
Advertisement
Table of Contents
