S&P STXD Series Installation, Operation And Maintenance Manual
S&P STXD Series Installation, Operation And Maintenance Manual

S&P STXD Series Installation, Operation And Maintenance Manual

Advertisement

Quick Links

Model STXD, STXDW, STXDRHUL
Installation, Operation, and Maintenance Manual
Direct Drive Upblast Roof/Sidewall Exhausters
READ AND SAVE THESE INSTRUCTIONS
The purpose of this manual is to aid in the proper installation and operation of fans manufactured
by S&P USA. These instructions are intended to supplement good general practices and are
not intended to cover detailed instruction procedures, because of the wide variety and types
of fans manufactured by S&P USA.
6393 Powers Avenue
Jacksonville, FL 32217
P: 800.961.7370
F: 800.961.7379
STXD-IOM-v.2_1218

Advertisement

Table of Contents
loading

Summary of Contents for S&P STXD Series

  • Page 1 Model STXD, STXDW, STXDRHUL Installation, Operation, and Maintenance Manual Direct Drive Upblast Roof/Sidewall Exhausters READ AND SAVE THESE INSTRUCTIONS The purpose of this manual is to aid in the proper installation and operation of fans manufactured by S&P USA. These instructions are intended to supplement good general practices and are not intended to cover detailed instruction procedures, because of the wide variety and types of fans manufactured by S&P USA.
  • Page 2: Installation

    INSTALLATION, OPERATION AND MAINTENANCE MANUAL INTRODUCTION: DO NOT INSTALL, USE OR OPERATE THIS EQUIPMENT UNTIL THIS MANUAL HAS BEEN READ AND UNDERSTOOD. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE USE. It is the responsibility of the purchaser to assure that the installation and maintenance of this equipment is handled by qualified personnel experienced in such work and equipment.
  • Page 3 1. CAUTION! This fan contains rotating parts and requires special service. Appropriate safety precautions should be taken during installation, operation and maintenance. 2. WARNING! Do not install or operate this fan in an environment or atmosphere where combustible or flammable materials, gasses or fumes are present, unless it was specifically designed and manufactured for use in that environment.
  • Page 4: Maintenance

    Lock out the power source before the installation of all accessories. Fan electrical power can now be applied and special attention should be given to determine if motor is working properly. At this time, with air system in full operation, with guards attached, it is well for the electrician to measure the operating amperage of the motor and compare with the nameplate rating to determine that the motor is operating under safe load conditions.
  • Page 5: Repair Parts

    REPAIR PARTS: 3. Fan Blades – Repair of individual fan blades or propeller assemblies is not recommended. Contact factory with blade size, number of blades, bore size, motor HP, air flow direction, rotation, fan RPM or sheave sizes and any order/tag information that is available for replacement. 4.
  • Page 6: Warranty

    WARRANTY: S&P USA warrants STXD and STXDW to be free from defects in material and workmanship for five (5) years from date of shipment and STXDRHUL to be free from defects in material and workmanship for two (2) years from date of shipment.
  • Page 7 Replacement Parts Model STXD 6-16 Model Wheel Motor Cover Cap Motor HP Wind Band STXD 1/10 400399 400125 400194 400400 1/10 400399 400125 400194 400400 1/10 400399 400125 400194 400400 1/25-1/10 400399 1/4 EXP 400397 400125 400194 1/4-1/3 400400 1/4-1/3 400401 400125 400194...

This manual is also suitable for:

Stxdw seriesStxdrhul seriesStxd 06cStxd 6Stxd 7Stxd 8 ... Show all

Table of Contents