Wwvb Atomic Time Signal; Settings Menu - La Crosse Technology 308-1417 Manual

• The station will search for the atomic signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• If there is no WWVB reception, the station will search for the Atomic Time Signal every 2 hours until the
WWVB Time is received.
• The Atomic Time Signal Icon
• After reception, this station will only search for the atomic signal after midnight.
• From normal time display, press and release the SET button to search for the WWVB time signal.
• Please be sure you have selected your time zone from the list in the Settings Menu. When the Atomic
Time Signal is received, the station will set to the time zone selected. Default is Eastern Time.
• For information about WWVB visit:
It is best to press one button at a time when setting your station.
1. Hold, then release the SET button to enter time set mode.
2. Press and release the + or - buttons to adjust the values. Hold to adjust quickly.
3. Press and release the SET button to confirm and move to the next item.
4. Press and release the BACKLIGHT button any time to exit settings.
Settings Menu Order:
• Language
• Beep ON/OFF
• Atomic ON/OFF
• Time Zone
• DST ON/OFF
• 12H/24H
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit/Celsius
Language
12/24 Format
W WV B ATOMI C TI ME S I G NA L
will flash while searching and will be solid when it has connected.
bit.ly/AtomicTime
S E TT ING S M ENU
Beep ON/OFF
Hour
Note: When Spanish (Español), is selected, the rest of
the instructions will be in that language.
Note: Your weekday will set automatically after year,
month, and date are set.
Time Zone
Atlantic
AST
EST Eastern
CST Central
MST Mountain
Pacific
PST
AKT Alaskan
HAT Hawaiian
Atomic ON/OFF
Minutes
Time Zone
Year
DST ON/OFF
Month
Page | 5