Automatic Time Limitation; Basic Settings - Junker JI36 50 Series Instructions For Installation And Use Manual

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.

Basic settings

The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
Childproof lock
™‚
‹ Deactivated.*
Activated.
‚
Sound signals
™ƒ
‹ Confirmation beep and error signal deactivated.
Only confirmation beep deactivated.
‚
ƒ All signals activated.*
Automatic timer.
™†
‹ Switched off.*
- Automatic shut-off time.
‚ ŠŠ
™‡ Duration of the time program function warning signal
10 seconds.
‚
ƒ 30 seconds.
1 minute.*
„
™ˆ Power-Management function
= Deactivated.*
‹
‚ = 1,000 W. minimum power.
= 1,500 W.
‚
= 2,000 W.
ƒ
etc.
Š or Š . = maximum power of hob.**
Return to basic settings
™‹
‹ Personal settings.*
Return to factory settings.
‚
*Factory settings
**The maximum power of the hob depends on the configuration of the installation's connection current. To not exceed this maximum
value, the hob includes a series of components that automatically control the power, distributing it between the hotplates in use
as required.
28
The indicator goes out when any symbol is pressed.
The hotplate can now be reset.
When the automatic time function is used, it is governed by the
and selected power level (from 1 to 10 hours).
" ‰