Time Programming Function; Switching A Hotplate Off Automatically; Automatic Timer; The Timer - Junker JI36 50 Series Instructions For Installation And Use Manual

Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■

Switching a hotplate off automatically

Enter the cooking time for the desired hotplate. The hotplate will
switch off automatically once this time has elapsed.
How to program
Select the cooking power required.
1.
Press the 0 symbol. The
2.
selected hotplate. In the time program function display
appears. To select another hotplate, press the
several times, until the
x
lights up.
Press the + or - symbol on the time program function.
3.
The basic setting appears:
+ symbol: 30 minutes.
- symbol: 10 minutes.

Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the cooking time will start to count down.
Once the time has elapsed
The hotplate switches off. The warning signal sounds, and the
in the time program function visual display
10 seconds. The indicator lights up on the hotplate display.
x
Pressing the 0 symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the symbol several times until the required
0
indicator lights up. Change the cooking time using
x
the + or - symbols, or set to

Cleaning lock function

Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the symbol. A signal sounds. The control panel is
R
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
x indicator lights up on the
symbol
0
indicator of the required hotplate

appears for
‹‹
.
‹‹
Notes
If a cooking time has been programmed in several zones, it
■
can be set to display all time values. To do this, press
the symbol several times until the
0
required hotplate lights up.
Cooking times of up to 99 minutes can be programmed.
■

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
‹‹
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a zone may be cancelled or
changed:
Press the symbol several times until the required
0
indicator lights up. Change the cooking time using
x
the + or - symbols, or set to

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the symbol several times until the
0
1.
lights up.
‹‹
Press the + or - symbol on the time program function. The
2.
basic setting will appear.
+ symbol: 10 minutes.
- symbol: 05 minutes.
Set the time required using the + or - symbols.
3.
After a few seconds, the timer will start to count down.
Once the time has elapsed
A warning beep sounds. In the time program function
display is shown, and the
‹‹
10 seconds the indicators turn off.
Pressing the 0
beep.
Changing or cancelling the time
Press the 0 symbol several times until the
up. Change the cooking time or set to
symbols + or -.
x
.
‹‹
appears in the time program function display.
indicator comes on. After
W
symbol turns off the indicators and stops the
‹‹
indicator for the
indicator
W
W indicator lights
with the
27