Sony Handycam DCR-DVD100 Technology Handbook page 17

Transferring Recordings to a PC
There are two ways to use your PC to view and edit DVD Handycam camcorder movies and still images.
After you finalize your DVD-R or DVD-RW disc, you can insert the disc directly into the DVD drive of a PC for editing
and playback.
If your disc is not finalized, you must use the supplied ImageMixer software whether you insert the disc into your PC's
DVD drive or transmit data between a DVD Handycam camcorder and a PC via USB-2 connector.
Once recordings have been transferred to your PC, you can perform creative movie editing and also duplicate your
discs.
B
Creating an Original DVD
After recorded images have been transferred to a PC,
they can be edited using supplied ImageMixer
software (vers. 1.5 for Sony). You can then create a
new original DVD containing your edited recording.
B
Duplicating a DVD
Connecting a DVD Handycam camcorder to a PC
allows you to create a new DVD disc even if your PC
has no DVD burner.
B
High-Speed USB Transmission
DVD Handycam camcorders adopt USB 2.0 as a
connection interface. At maximum transmission rate of
22.16 Mbps*, you can transfer a large amount of data
quickly and smoothly.
* Your PC must also support USB 2.0 (high-speed USB) in order to
transfer at a rate of 22.16 Mbps. Maximum transmission speed will
vary depending on the PC model you are using.
DVD Handycam
(When USB 2.0 is used)
When USB 1.1 is
used
22.16Mbps
10 20
22.16Mbps
7~8Mbps
D V D H a n d y c a m T E C H N O L O G Y H A N D B O O K
17