Assembly Instructions - Allen + Roth Winthrop Manual

ASSEMBLY INSTRUCTIONS

1. Carefully place the table top (2) upside down on a soft surface. Failure to do so
could result in damage or scratches to the tabletop. Attach the table leg A (3),
table leg B (4), table leg C (5) and table leg D (6) to the top (2). Use bolt and
washer (AA).
Hardware Used
2. Attach side panels B (8) to the table legs.
Use bolt and washer (BB).
Hardware Used
3 Attach the gas barrier (9) to the table leg A (3) and table leg D (6).
.
Use bolt and washer (AA).
Hardware Used
4 Attach the tank base (10) to the table leg A (3), table leg B (4), table legs C (5)
.
and table leg D (6). Use bolt and washer (AA).
Hardware Used
1
x 8
2
x 12
3
x 2
4
x 4
8
ATTENTION: Assembly is
easiest when you partially
tighten bolts at first. Only
tighten by hand.
ATTENTION: Assembly is
easiest when you partially
tighten bolts at first. Only
tighten by hand.